• Energy Calibration Standards
  • What purpose does the calibration standard serve?
  • How is the calibration standard used?
• How to replace a broken mylar window on a Lytle Chamber
  • Step 1. Taking the plate apart from the detector
  • Step 2. Stretching the aluminized mylar
  • Step 3. Epoxy the Ring to Mylar
  • Step 4. Screw the two halves of the front ring together
  • Step 5: Re-assemble the stack of conducting rings
  • Step 6: Re-attache the BNC connectors
  • Step 7. Final assembly
• Sample-related distortions to measured data
  • Tutorials and software
  • Literature references
• Preparing Doubly Contained Samples for XAS Measurement
  • Step 0: Preparing your sample
  • Step 1: Preparing the kapton tape
  • Step 2: Cover one side of the sample frame
  • Step 3: Load the sample
  • Step 4: Finishing off the sample holder
  • Step 5: Preparing the secondary containment.
  • Step 6: Finishing the secondary containment
  • Further considerations